Skip to content

Orders > 250€

Free

Contact

+393514538116

0
1 of 8

NUCULAR Controller for TALARIA XXX TL2500 (Black)

Regular price
€1.199,95
Regular price
Sale price
€1.199,95
VIDEO MONTAGGIO Eng
NUCULAR Controller for TALARIA XXX TL2500 (Black)NUCULAR Controller for TALARIA XXX TL2500 (Black)NUCULAR Controller for TALARIA XXX TL2500 (Black)NUCULAR Controller for TALARIA XXX TL2500 (Black)NUCULAR Controller for TALARIA XXX TL2500 (Black)NUCULAR Controller for TALARIA XXX TL2500 (Black)NUCULAR Controller for TALARIA XXX TL2500 (Black)

This item is NOT approved for road use!!

Product code: NUC-CON-XXX

Quantity: 1

Features

ARM Cortex M4 CPU and low ESR 105C capacitors for 10,000 hours

Voltage monitoring on all motor phases, power, 12 V and 5 V system power

Synchronous rectification, ultra-low dropout, fast PWM for very high efficiency

Direct phase current detection and hardware overcurrent protection

Configurable limit for motor and battery current

Various electric brake modes available

Battery protection: overcurrent, overvoltage, and undervoltage protection

Motor and controller temperature

Supports motors with any number of poles

Up to 100,000 electric RPM (ERPM = pole pair * RPM)

Automatic detection of Hall position sensors at 60 degrees or 120 degrees

Supports torque mode, speed mode, and combined operation, instant throttle response, no delay

Aluminum housing for maximum heat dissipation, dual-sided FET for best heat distribution

Wide range of inputs, configurable: 0-5 V brake, brake switch, 0-5 V throttle, pedal torque sensor, pedal assist sensor

Configurable from display

Automatic shut-off without operation

Various control modes: sensorless, square, combined, FOC

Multiple controllers can exist on the CAN bus (open protocol LEVCAN )

Charging mode via the motor with the controller, connect any DC power supply to the controller to charge the battery

Onboard Computer

The onboard computer features a large sunlight-resistant screen for displaying main parameters, driving mode settings, software updates for all system components, battery monitoring, and device charging status via USB.

Features

Charge, speed, power, current, voltage, etc. display

Show information of all devices on the CAN-bus

Software update for devices from the MicroSD card and parameter setting

Integrated accelerometer

Many control inputs, use a single wire from the display to the practical panel
of the controller

with connectors on the back, external waterproof connectors are not necessary

Included GoPro mount on the steering tube

Configurable characters, multilingual

Large LCD, visible under direct light

Built-in light sensor for brightness control and

headlight LCD heater for condensation protection and winter use

Dimensions (LxHxW): 80x90x17 mm. Weight 110 g

Technical Specifications
LCD size 2.9"

FSTN, monochrome

Screen resolution 240x128 px

Screen heating

RGB button backlighting

MicroSD slot

USB charger 5.2 V 2A

Password protection

English language

IP54 class