Complete set composed of Hadron Battery 72V 56Ah, Nucular P24F Controller, and Sotion Motor.

Compatible with Talaria Sting models:

• TL3000 (MX3)
• TL4000 (MX4)

HADRON BATTERY

Hadron branded battery, fully designed and developed by the renowned Chinese manufacturer of high-quality batteries.

• Voltage = 72 V
• Capacity = 56 Ah (4032 Wh)

FULLY CERTIFIED BATTERY (UN38.3, CE, MSDS)

Thorough testing performed by E-Volvendo on bikes we built and winners of the FIM World Ebike Cross Championship and FMI Ebike Cross.

• High capacity and high discharge power pouch cells.
• The battery can deliver 300 AMP continuous (21.5 kW nominal) tested for 1 hour in laboratory conditions.
• 500 AMP peak current for a maximum power of 35 kW.
• 56 Ah (4032 Wh) capacity, +40% range compared to original batteries.
• Usable only with programmable controllers (Nucular, KO Moto, Ebmx, etc.)
• All wiring and connectors included to install on any Talaria or Sur Ron model.
• INCLUDES 15 AMP ELECTRONIC CHARGER

NUCULAR CONTROLLER

Features:

- ARM Cortex M4 CPU and 105°C low ESR capacitors with 10,000 hours lifetime
- Voltage monitoring on all motor phases, power supply, 12V and 5V system power
- Synchronous rectification, ultra-low drop, fast PWM for very high efficiency
- Direct phase current detection and hardware overcurrent protection
- Configurable motor and battery current limits
- Multiple electric brake modes available
- Battery protection: overcurrent, overvoltage, undervoltage, motor and controller temperature protection
- Supports motors with any number of poles
- Up to 100,000 electric RPM (ERPM = pole pairs × RPM)
- Automatic detection of Hall position sensors at 60° or 120°
- Supports torque mode, speed mode, combined operation, instant throttle response with no delay
- Aluminum housing for maximum heat dissipation, double-sided FETs for optimal heat distribution
- Wide configurable inputs: brake 0-5 V, brake switch, throttle 0-5 V, pedal torque sensor, pedal assist sensor
- Configurable via display
- Auto shutdown without operation
- Various control modes: sensorless, trapezoidal, combined, FOC
- Multiple controllers can exist on CAN bus (open protocol LEVCAN)
- Motor charging mode via controller, connect any DC power supply to controller to charge battery

Video guides on the installation process kit:

Talaria Sting: https://www.youtube.com/watch?v=j6OTAh_XqP4&t

Onboard Computer

The onboard computer features a large, sunlight-readable screen to display key parameters, driving mode settings, software updates for all system components, battery control, and device charge status via USB.

Features:

- Display for charge, speed, power, current, voltage, etc.
- Shows info for all CAN-bus devices
- Software updates from MicroSD card and parameter setting
- Built-in accelerometer
- Many control inputs, using a single wire from display to controller panel with connectors at rear, no external waterproof connectors needed
- Included GoPro mount for handlebar tube
- Configurable fonts, multilingual
- Large LCD, visible under direct sunlight
- Built-in light sensor for brightness control and LCD heater for condensation and winter protection
- Dimensions (LxWxH): 80x90x17 mm, Weight: 110 g

Technical specifications:

- LCD size 2.9"
- FSTN, monochrome
- Screen resolution 240x128 px
- Screen heating
- RGB button backlight
- MicroSD slot
- USB charger 5.2 V 2A
- Password protection
- English language
- IP54 rating

SOTION MOTOR