NUCULAR P24F Controller for TALARIA STING

This item is NOT approved for road use!!

Product code: NUC-CON-TAL-STING

Free shipping.

Quantity: 1

For Talaria Sting TL3000 / TL4000 / TL5500

Mx3 Mx4 Mx5

Features:

- ARM Cortex M4 CPU and 105°C low ESR capacitors rated for 10,000 hours
- Voltage monitoring on all motor phases, power supply, 12V and 5V system power
- Synchronous rectification, ultra-low drop, fast PWM for very high efficiency
- Direct detection of phase current and hardware overcurrent protection
- Configurable motor and battery current limits
- Multiple electric brake modes available
- Battery protection: overcurrent, overvoltage, undervoltage protection, motor and controller temperature protection
- Supports motors with any number of poles
- Up to 100,000 electric RPM (ERPM = pole pairs * RPM)
- Automatic detection of Hall sensor position at 60 or 120 degrees
- Supports torque mode, speed mode, and combined operation; instant throttle response, no delay
- Aluminum housing for maximum heat dissipation, double-sided FETs for best heat distribution
- Multiple configurable inputs: brake 0-5V, brake switch, throttle 0-5V, pedal torque sensor, pedal assist sensor
- Configurable via display
- Auto shutdown when inactive
- Various control modes: sensorless, trapezoidal, combined, FOC
- Multiple controllers can exist on the CAN bus (open protocol LEVCAN)
- Motor-assisted charging mode with controller; connect any DC power supply to charge the battery

Video guides on the installation process kit:

Talaria Sting: https://www.youtube.com/watch?v=j6OTAh_XqP4&t

On-board Computer

The on-board computer features a large sunlight-readable screen to display main parameters, riding mode settings, software updates for all system components, battery monitoring, and device charging status via USB.

Features:

- Displays charge, speed, power, current, voltage, etc.
- Shows info from all devices on the CAN bus
- Software updates via MicroSD card and parameter setting
- Built-in accelerometer
- Many control inputs, using only one wire from the display to the controller panel with connectors on the back, no external waterproof connectors needed
- GoPro mount included for the steering tube
- Configurable fonts, multilingual
- Large LCD, visible in direct sunlight
- Built-in light sensor for brightness control and LCD heater for condensation protection and winter use
- Dimensions (LxWxH): 80x90x17 mm. Weight 110 g

Technical specifications:

- LCD size 2.9"
- FSTN, monochrome
- Screen resolution 240x128 px
- Screen heating
- RGB button backlight
- MicroSD slot
- USB charger 5.2 V 2A
- Password protection
- English language
- IP54 rating