Complete set composed of Hadron 72V 56Ah Battery and Nucular P24F Controller.

Compatible with Talaria Sting models:

• TL3000 (MX3)
• TL4000 (MX4)
• TL5500 (MX5)

HADRON BATTERY

Hadron battery brand, fully manufactured and developed by the renowned Chinese producer of high-quality batteries.

• Voltage = 72V
• Capacity = 56 Ah (4032 Wh)

Battery FULLY CERTIFIED (UN38.3, CE, MSDS)

Thorough testing performed by E-Volvendo on bikes we built and winners of the FIM World Ebike Cross Championship and FMI Ebike Cross.

• High capacity and high discharge power pouch cells.
• The battery can deliver 300AMP continuous (21.5kW nominal) tested for 1 hour in laboratory.
• 500AMP peak power for a maximum of 35kW.
• 56Ah (4032Wh) capacity with +40% range compared to original batteries.
• Usable only with programmable controllers (Nucular, KO Moto, Ebmx, etc.)
• Includes all wiring and connectors for installation on any Talaria or Sur Ron model.
• Includes 15 AMP electronic charger

NUCULAR CONTROLLER

Features:

- CPU ARM Cortex M4 and 105C low ESR capacitors rated for 10,000 hours
- Voltage monitoring on all motor phases, 12V and 5V system power
- Synchronous rectification, ultra-low drop, fast PWM for very high efficiency
- Direct phase current detection and hardware overcurrent protection
- Configurable motor and battery current limits
- Multiple electric brake modes available
- Battery protection: overcurrent, overvoltage, undervoltage, motor and controller temperature protection
- Supports motors with any number of poles
- Up to 100,000 electrical RPM (ERPM = pole pairs * RPM)
- Automatic detection of Hall sensor positions at 60 or 120 degrees
- Supports torque mode, speed mode, combined operation, instant throttle response, no delay
- Aluminum housing for maximum heat dissipation, dual-sided FETs for better heat distribution
- Wide configurable inputs: brake 0-5V, brake switch, throttle 0-5V, pedal torque sensor, pedal assist sensor
- Configurable from display
- Automatic shutdown when idle
- Multiple control modes: sensorless, trapezoidal, combined, FOC
- Multiple controllers on CAN bus (open protocol LEVCAN)
- Motor charging mode via controller, connect any DC power supply to charge the battery

Installation video guides:

Talaria Sting: https://www.youtube.com/watch?v=j6OTAh_XqP4&t

Onboard Computer

The onboard computer features a large sunlight-readable screen to display main parameters, driving mode settings, software updates for all system components, battery monitoring, and USB device charge status.

Features:

- Displays charge, speed, power, current, voltage, etc.
- Shows all device info on CAN-bus
- Software update from MicroSD card and parameter settings
- Built-in accelerometer
- Many control inputs, uses a single wire from display to controller panel with connectors on back, no external waterproof connectors needed
- GoPro mount on steering tube included
- Configurable fonts, multilingual
- Large LCD visible under direct sunlight
- Built-in light sensor for brightness control and LCD heater for condensation protection and winter use
- Dimensions (LxWxH): 80x90x17 mm, Weight: 110 g

Technical Specifications:

- LCD size 2.9"
- FSTN monochrome
- Screen resolution 240x128 px
- Screen heater
- RGB button backlight
- MicroSD slot
- USB charger 5.2V 2A
- Password protection
- English language
- IP54 rating